Video output failure still

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

Video output failure still

arch general mailing list-2
 Still no joy with this video problem

i can play all videos via Firefox  no problem  can not do TV via FF .

Every application to play TV or a recorded film fails with the same report   this
started happening around 2 months ago but have not been able to pin down exactly
which update caused the failure  the system is fully updated every day .

###  uname -a
Linux ds9 4.10.11-1-ARCH #1 SMP PREEMPT Tue Apr 18 08:39:42 CEST 2017 x86_64
GNU/Linux

### lspci -v
01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev
a2) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device 34d8
        Flags: bus master, fast devsel, latency 0, IRQ 27, NUMA node 0
        Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at ce000000 (64-bit, prefetchable) [size=32M]
        I/O ports at d800 [size=128]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: nouveau
        Kernel modules: nouveau

### lsmod |grep nouveau
nouveau              1544192  12
led_class              16384  2 input_leds,nouveau
mxm_wmi                16384  1 nouveau
wmi                    16384  2 mxm_wmi,nouveau
video                  36864  1 nouveau
ttm                    86016  1 nouveau
drm_kms_helper        126976  1 nouveau
drm                   303104  15 nouveau,ttm,drm_kms_helper
i2c_algo_bit           16384  3 cx88_vp3054_i2c,cx88xx,nouveau
button                 16384  1 nouveau

###  dmesg |grep nouveau
[   13.222319] nouveau 0000:01:00.0: NVIDIA GT216 (0a5000a2)
[   13.358327] nouveau 0000:01:00.0: bios: version 70.16.39.00.0f
[   13.358663] nouveau 0000:01:00.0: bios: OOB 1 d7500086 d7500086
[   13.358866] nouveau 0000:01:00.0: bios: OOB 1 b42800b3 b42800b3
[   13.359058] nouveau 0000:01:00.0: bios: OOB 1 adb75814 adb75814
[   13.359250] nouveau 0000:01:00.0: bios: OOB 1 adb75814 adb75814
[   13.359439] nouveau 0000:01:00.0: bios: OOB 1 adb75814 adb75814
[   13.360092] nouveau 0000:01:00.0: fb: 1024 MiB DDR2
[   14.441658] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[   14.441659] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   14.441664] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   14.441665] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   14.441667] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[   14.441670] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[   14.441671] nouveau 0000:01:00.0: DRM: DCB outp 02: 01032310 00000000
[   14.441673] nouveau 0000:01:00.0: DRM: DCB outp 03: 02021362 00020010
[   14.441674] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[   14.441675] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[   14.441676] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[   14.444620] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please
convert the driver to use hwmon_device_register_with_info(). [   14.464244] nouveau
0000:01:00.0: DRM: MM: using COPY for buffer copies [   14.524032] nouveau
0000:01:00.0: DRM: allocated 1280x1024 fb: 0x70000, bo ffff880130211400
[   14.524777] fbcon: nouveaufb (fb0) is primary device [   14.681857] nouveau
0000:01:00.0: fb0: nouveaufb frame buffer device [   14.694858] [drm] Initialized
nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0

###  dmesg |grep vga
[    0.637534] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.637536] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none [    0.637538] pci 0000:01:00.0: vgaarb:
bridge control possible [    0.637538] vgaarb: loaded

Running kaffeine from a terminal  calling tv sound ok no video
[00007f8fa4001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.
[00007f8fa4001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.
[00007f8fa4001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.

same again but trying to play a video stored on the system

[00007f1598001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.
[00007f1598001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.
[00007f1598001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.
[00007f1598001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.
[00007f1598001268] vdpau_display vout display error: output surface creation
failure: A catch-all error, used when no other error code applies.

with exactly the same respomse from VLC as well this has now been in this
brain dead state for a couple of months  the system is updated daily with
pacman -Syu

Help needed to get this problem flattened .

Hope someone can spot the problem or if not what more info do you need .


Thanks Pete .
Reply | Threaded
Open this post in threaded view
|

Re: Video output failure still

Ralf Mardorf-4
On Sat, 22 Apr 2017 23:04:58 +0100, pete nikolic via arch-general wrote:
>started happening around 2 months ago but have not been able to pin
>down exactly which update caused the failure
>vdpau_display vout display error

Have you googled for "vdpau display vout display error"? I'm asking,
because you didn't mention what exactly you already have done, to pin
down the culprit. Don't read just Arch related posts, consider to also
read e.g. Ubuntu related posts, if Arch related posts shouldn't cover
this issue for the same graphics.
Have you e.g. ensured that regarding the driver everything is ok?

https://wiki.archlinux.org/index.php/Hardware_video_acceleration#Installing_VDPAU

https://wiki.archlinux.org/index.php/downgrading_packages

/var/log/pacman.log helps you to search for packages that might have to
do with the issue.
Reply | Threaded
Open this post in threaded view
|

Re: Video output failure still

LoneVVolf
Pete,

do you have AUR nouveau-fw installed ? [1]

Please post the output of vdpauinfo .

LW




[1] https://nouveau.freedesktop.org/wiki/VideoAcceleration/#firmware
Reply | Threaded
Open this post in threaded view
|

Re: Video output failure still

arch general mailing list-2
In reply to this post by Ralf Mardorf-4
On Sun, 23 Apr 2017 08:23:29 +0200
Ralf Mardorf <[hidden email]> wrote:

> On Sat, 22 Apr 2017 23:04:58 +0100, pete nikolic via arch-general wrote:
> >started happening around 2 months ago but have not been able to pin
> >down exactly which update caused the failure
> >vdpau_display vout display error  
>
> Have you googled for "vdpau display vout display error"? I'm asking,
> because you didn't mention what exactly you already have done, to pin
> down the culprit. Don't read just Arch related posts, consider to also
> read e.g. Ubuntu related posts, if Arch related posts shouldn't cover
> this issue for the same graphics.
> Have you e.g. ensured that regarding the driver everything is ok?
>
> https://wiki.archlinux.org/index.php/Hardware_video_acceleration#Installing_VDPAU
>
> https://wiki.archlinux.org/index.php/downgrading_packages
>
> /var/log/pacman.log helps you to search for packages that might have to
> do with the issue.

Hi Ralf .

Yes been there it was the first place i looked when the issue first showed up  
one of the problems is i have no real way of knowing exactly when this issue first
occurd  althou i update the system every day i do not always use the tv card or
want/need to watch a video  .

I am not even sure which package/s would have an effect like this  around the same
time i had a cut&paste issue that prevented me doing cut&paste using the mouse that
has now rectified itself but the video issue still keeps me looking for the fix .

Thanks   Pete .
Reply | Threaded
Open this post in threaded view
|

Re: Video output failure still

arch general mailing list-2
In reply to this post by LoneVVolf
On Sun, 23 Apr 2017 13:51:19 +0200
LoneVVolf <[hidden email]> wrote:

> Pete,
>
> do you have AUR nouveau-fw installed ? [1]
>
> Please post the output of vdpauinfo .
>
> LW
>
>
>
>
> [1] https://nouveau.freedesktop.org/wiki/VideoAcceleration/#firmware


Hi Lonewolf

Yes i have the AUR nouveau-fw installed

output of  vdpauinfo
display: :0   screen: 0
API version: 1
Information string: G3DVL VDPAU Driver Shared Library version 1.0

Video surface:

name   width height types
-------------------------------------------
420     8192  8192  NV12 YV12
422     8192  8192  UYVY YUYV
444     8192  8192  Y8U8V8A8 V8U8Y8A8

Decoder capabilities:

name                        level macbs width height
----------------------------------------------------
MPEG1                           0 16384  2048  2048
MPEG2_SIMPLE                    3 16384  2048  2048
MPEG2_MAIN                      3 16384  2048  2048
H264_BASELINE                  41 16384  2048  2048
H264_MAIN                      41 16384  2048  2048
H264_HIGH                      41 16384  2048  2048
VC1_SIMPLE                      1 16384  2048  2048
VC1_MAIN                        2 16384  2048  2048
VC1_ADVANCED                    4 16384  2048  2048
MPEG4_PART2_SP                  3 16384  2048  2048
MPEG4_PART2_ASP                 5 16384  2048  2048
DIVX4_QMOBILE                  --- not supported ---
DIVX4_MOBILE                   --- not supported ---
DIVX4_HOME_THEATER             --- not supported ---
DIVX4_HD_1080P                 --- not supported ---
DIVX5_QMOBILE                  --- not supported ---
DIVX5_MOBILE                   --- not supported ---
DIVX5_HOME_THEATER             --- not supported ---
DIVX5_HD_1080P                 --- not supported ---
H264_CONSTRAINED_BASELINE      --- not supported ---
H264_EXTENDED                  --- not supported ---
H264_PROGRESSIVE_HIGH          --- not supported ---
H264_CONSTRAINED_HIGH          --- not supported ---
H264_HIGH_444_PREDICTIVE       --- not supported ---
HEVC_MAIN                      --- not supported ---
HEVC_MAIN_10                   --- not supported ---
HEVC_MAIN_STILL                --- not supported ---
HEVC_MAIN_12                   --- not supported ---
HEVC_MAIN_444                  --- not supported ---

Output surface:

name              width height nat types
----------------------------------------------------
B8G8R8A8          8192  8192    y  NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8 A4I4 I4A4
A8I8 I8A8 R8G8B8A8          8192  8192    y  NV12 YV12 UYVY YUYV Y8U8V8A8 V8U8Y8A8
A4I4 I4A4 A8I8 I8A8 R10G10B10A2       8192  8192    y  NV12 YV12 UYVY YUYV Y8U8V8A8
V8U8Y8A8 A4I4 I4A4 A8I8 I8A8 B10G10R10A2       8192  8192    y  NV12 YV12 UYVY YUYV
Y8U8V8A8 V8U8Y8A8 A4I4 I4A4 A8I8 I8A8

Bitmap surface:

name              width height
------------------------------
B8G8R8A8          8192  8192
R8G8B8A8          8192  8192
R10G10B10A2       8192  8192
B10G10R10A2       8192  8192
A8                8192  8192

Video mixer:

feature name                    sup
------------------------------------
DEINTERLACE_TEMPORAL             y
DEINTERLACE_TEMPORAL_SPATIAL     -
INVERSE_TELECINE                 -
NOISE_REDUCTION                  y
SHARPNESS                        y
LUMA_KEY                         y
HIGH QUALITY SCALING - L1        y
HIGH QUALITY SCALING - L2        -
HIGH QUALITY SCALING - L3        -
HIGH QUALITY SCALING - L4        -
HIGH QUALITY SCALING - L5        -
HIGH QUALITY SCALING - L6        -
HIGH QUALITY SCALING - L7        -
HIGH QUALITY SCALING - L8        -
HIGH QUALITY SCALING - L9        -

parameter name                  sup      min      max
-----------------------------------------------------
VIDEO_SURFACE_WIDTH              y        48     2048
VIDEO_SURFACE_HEIGHT             y        48     2048
CHROMA_TYPE                      y  
LAYERS                           y         0        4

attribute name                  sup      min      max
-----------------------------------------------------
BACKGROUND_COLOR                 y  
CSC_MATRIX                       y  
NOISE_REDUCTION_LEVEL            y      0.00     1.00
SHARPNESS_LEVEL                  y     -1.00     1.00
LUMA_KEY_MIN_LUMA                y  
LUMA_KEY_MAX_LUMA                y  


.

Pete .